Belshaw Adamatic MK-0557-11.5 - Drain valve for Mark2
|Item:||Belshaw Adamatic MK-0557-11.5 - Drain valve for Mark2|
|Shipping:||Usually Ships In 1-2 Business Days|
OverviewAll Donut Robots except gas models have a short drain with a heavy duty metal cap attached to it, to close it off. This Drain and Valve can be attached to the fryer, instead of the threaded cap. To use the drain and valve, you will need: A hole in the table that holds your fryer to allow the drain and valve to extend through it, enough room under the fryer for the Drain and Valve. The Drain and Valve extends 18" (46cm) below the fryer kettle. If you have this room, it will save A LOT of time and trouble emptying shortening. Instead of siphoning, just let the drain do the work. If you use the Drain and Valve when filtering shortening, you will need a filtration system to remove debris from the shortening. You can use a Belshaw EZMelt 18 or any other effective method. If you have room for the Drain and Valve, it will save A LOT of time and trouble emptying shortening. If you do not have this room under the fryer, the drain and valve will probably not help you, and you should consider the Filter Flo siphon (above) instead. The drain cap that comes standard is NOT designed to screw on and off when you empty shortening. Belshaw Adamatic by Unisource Drain valve for Mark2 [MK-0557-11.5] is perfect for your establishment.
|Manufacturer||Belshaw By Unisource|
√ Manufactured With High Quality Materials
√ Reputable Brand Name That You Can Trust
√ This Item Is Simple To Install / Use
√ This Item Is Very Easy To Clean
√ Covered Under Belshaw Adamatic's Warranty
√ 80+ Years In The Bakery Equipment Industry
√ Elite Restaurant Equipment Best Price Program
√ Ships From Belshaw's 120,000 Sq. Ft. Facility
Made in USA
This item was manufactured in the United States of America.
This item has met the standards set by Underwriters Laboratories (UL), which tests safety.