Search results for 'pot'

Related Categories:
per page
Set Ascending Direction

Grid  List 

  1. Belshaw Adamatic by Unisource EZMelt Shortening Filters [EZMelt 18]
    Belshaw Adamatic EZMelt 18 - EZMelt Shortening Filters

    List Price: $5,810.32

    Our Price: $3,438.06

    THE BEST FILTRATION SYSTEM FOR 624 AND 724CG/FG FRYERS. MELTS, FILTERS AND PUMPS BACK ON DEMAND. Compatible with 624, 724CG and 724FG fryers. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt24 is a recycling filter that heats shortening in the tank, with the following benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity up to 22.5 gallons (85 Liters) - approximately equivalent to 163 lbs (73 kg) of shortening. Compatible with Belshaw's floor model 624, 724CG and 724FG fryers. For other brand fryers, check capacity and dimensions to determine compatibility.Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. Tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy duty pump & motor for pumping shortening to the fryer on demand. Heavy duty, moisture repellent foot switch for activating pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Hand held rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. Stainless steel frame, tank and casters. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource EZMelt Shortening Filters [EZMelt 18] is perfect for your establishment. Learn More
  2. Belshaw Adamatic by Unisource Cylinder for Type N Depositors 1-7/8" [N-1035L-Bx1-7/8]
    Belshaw Adamatic N-1035L-Bx1-7/8 - Cylinder for Type N Depositors 1-7/8"

    List Price: $455.19

    Our Price: $269.35

    Plunger size and cylinder size must always match. For example, a 1-1/2 inch plunger must always be used with a 1-1/2 inch cylinder. You can use all types of plunger with a cylinder of the same size. Used with Type N depositors. Belshaw Adamatic by Unisource Cylinder for Type N Depositors 1-7/8" [N-1035L-Bx1-7/8] is perfect for your establishment. Belshaw Adamatic by Unisource Cylinder for Type N Depositors 1-7/8" [N-1035L-Bx1-7/8] is perfect for your establishment. Learn More
  3. Belshaw Adamatic by Unisource Icing Pan for HI24 Models [HI24-0006]
    Belshaw Adamatic HI24-0006 - Icing Pan for HI24 Models

    List Price: $571.14

    Our Price: $337.95

    The optional extra icing pan is useful when using multiple icing flavors (chocolate, vanilla, strawberry, etc) on a Belshaw Adamatic HI24F Icer. Instead of emptying, cleaning, and refilling a single pan with multiple flavors, you can save large amounts of time by using one pan for each flavor. When you change icing, you can simply swap the pan for another with a different flavor. But remember that most donut icings neeed to be warm when you apply them to donuts. For that reason, when you change to a new flavor the new icing must be warmed in advance. You can do this either with an extra heating panel (see accessories), or an oven set to very low heat, with the icing covered. Belshaw Adamatic by Unisource Icing Pan for HI24 Models [HI24-0006] is perfect for your establishment. Learn More
  4. Belshaw Adamatic by Unisource Star Plunger for Type B/F Depositors 1-3/4" [7SC-SSx1-3/4]
    Belshaw Adamatic 7SC-SSx1-3/4 - Plunger for Type B/F Depositors 1-3/4"

    List Price: $331.05

    Our Price: $195.89

    The Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it. Must match a cylinder of the same size. Used with Type B and Type F depositors. Belshaw Adamatic by Unisource Star Plunger for Type B/F Depositors 1-3/4" [7SC-SSx1-3/4] is perfect for your establishment. Learn More
  5. Belshaw Adamatic by Unisource Filter-Flo Siphon [DR42-1048]
    Belshaw Adamatic DR42-1048 - Filter-Flo Siphon

    List Price: $515.39

    Our Price: $304.96

    The Filter-Flo is a dependable heavy duty siphon that extracts and filters shortening from fryers, in situations where there is no room for a built-in drain, or if your fryer has no built-in drain. A squeeze of the large bulb starts the flow which can empty a Mark II in a few minutes. A reusable cloth filter cleans as the liquid passes through. Note: the Filter-Flo requires a customer-supplied leakproof container for filtered shortening to pour into. Filter-Flo is not needed if you already have a shortening filter such as SF or EZMelt. Belshaw Adamatic by Unisource Filter-Flo Siphon [DR42-1048] is perfect for your establishment. Learn More
  6. Belshaw Adamatic by Unisource Krinkle Plunger for Type B/F Depositors 1-7/8" [7F-1004x1-7/8]
    Belshaw Adamatic 7F-1004x1-7/8 - Krinkle Plunger for Type B/F Depositors 1-7/8"

    List Price: $643.29

    Our Price: $380.65

    Krinkle donuts resemble 8 ball shapes linked together in a ring. This plunger can make Asian 'Pon-de-Ring' donuts. Used with Type B and Type F depositors. Belshaw Adamatic by Unisource Krinkle Plunger for Type B/F Depositors 1-7/8" [7F-1004x1-7/8] is perfect for your establishment. Learn More
  7. Belshaw Adamatic by Unisource Ball Attachment for Type K or Donut Robot [DR42-1017X1.563]
    Belshaw Adamatic DR42-1017X1.563 - Ball Attachment for Type K or Donut Robot

    List Price: $261.87

    Our Price: $154.95

    Ball attachment for Donut Depositor, attaches to K-1011A or K-1011S, deposits four ball shapes. For 1-9/16 inch plunger only. Attachments are small devices that insert easily onto 1-9/16" Plain or Star plungers only. Donuts produced by the Ball attachments can either stick together or remain apart, depending on the height of the hopper above the shortening. Belshaw Adamatic by Unisource Ball Attachment for Type K or Donut Robot [DR42-1017X1.563] is perfect for your establishment. Learn More
  8. Belshaw Adamatic by Unisource Donut Robot Electric Automatic Fryer [Mark II]
    Belshaw Adamatic Mark II - Donut Robot Electric Automatic Fryer

    List Price: $15,129.32

    Our Price: $8,952.26

    Fryers deposit, fry, turn, and dispense cake donuts automatically, improving donut quality and reducing costs. Training and labor requirements are substantially reduced while high quality, consistent and repeatable donuts are produced time after time.Additionally,Donut Robot® fryers can reduce shortening use by up to 50% in comparison with kettle fryers. Donut Robot® fryers are fun to watch and always attract passers-by – improving foot traffic and impulse buys. Donut size, frying times and shortening temperature can be adjusted within a generous range. Donut Robots can produce cake donuts right out of the box. In addition, you will need a way to filter your shortening ~ either an EZMelt18 Melter-Filter, or a Filter-Flo Siphon. A Roto Cooler is another popular accessory. With a feed table and a set of cloths and trays, you can make excellent raised donuts. You can see all these accessories on the reverse page of this brochure. Belshaw Adamatic by Unisource Donut Robot Electric Automatic Fryer [Mark II] is perfect for your establishment. Learn More
  9. Belshaw Adamatic by Unisource Cylinder for Type B/F Depositors 1-3/4" [0035SSAx1-3/4]
    Belshaw Adamatic 0035SSAx1-3/4 - Cylinder for Type B/F Depositors 1-3/4"

    List Price: $354.58

    Our Price: $209.81

    Plunger size and cylinder size must always match. For example, a 1-3/4" plunger must always be used with a 1-3/4" cylinder. However, you can use any variety of 1-3/4" plunger with a cylinder of the same size. Used with Type B and Type F depositors. Belshaw Adamatic by Unisource Cylinder for Type B/F Depositors 1-3/4" [0035SSAx1-3/4] is perfect for your establishment. Learn More
  10. Belshaw Adamatic by Unisource Shortening Filter [SF34]
    Belshaw Adamatic SF34 - Shortening Filter

    List Price: $5,786.47

    Our Price: $3,423.94

    Compatible with 734CG and 734FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy duty pump and motor for pumping back shortening to the fryer after filtering. Foot pedal switch for activating pump. Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer. Slides under compatible floor and tabletop fryers. Heavy duty stainless steel frame, tank and casters. Shortening reservoir is removable for periodic cleaning. SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt34 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-PhaseCertified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource Shortening Filter [SF34] is perfect for your establishment. Learn More
  11. Belshaw Adamatic by Unisource Donut Robot Gas Automatic Fryer [Mark 5 GP]
    Belshaw Adamatic Mark 5 GP - Donut Robot Gas Automatic Fryer

    List Price: $26,512.50

    Our Price: $15,687.87

    Fryers deposit, fry, turn, and dispense cake donuts automatically, improving donut quality and reducing costs. Training and labor requirements are substantially reduced while high quality, consistent and repeatable donuts are produced time after time.Additionally,Donut Robot® fryers can reduce shortening use by up to 50% in comparison with kettle fryers. Donut Robot® fryers are fun to watch and always attract passers-by – improving foot traffic and impulse buys. Donut size, frying times and shortening temperature can be adjusted within a generous range. Donut Robots can produce cake donuts right out of the box. In addition, you will need a way to filter your shortening ~ either an EZMelt18 Melter-Filter, or a Filter-Flo Siphon. A Roto Cooler is another popular accessory. With a feed table and a set of cloths and trays, you can make excellent raised donuts. You can see all these accessories on the reverse page of this brochure. Belshaw Adamatic by Unisource Donut Robot Gas Automatic Fryer [Mark 5 GP] is perfect for your establishment. Learn More
  12. Belshaw Adamatic by Unisource Star Plunger for Type N Depositors 1-3/4" [N-1007SSSx1-3/4]
    Belshaw Adamatic N-1007SSSx1-3/4 - Plunger for Type N Depositors 1-3/4"

    List Price: $479.65

    Our Price: $283.82

    The Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it. Must match a cylinder of the same size. Used with Type N depositors. Belshaw Adamatic by Unisource Star Plunger for Type N Depositors 1-3/4" [N-1007SSSx1-3/4] is perfect for your establishment. Learn More
  13. Belshaw Adamatic by Unisource HG18EZ Glazer [HG18EZ]
    Belshaw Adamatic HG18EZ - HG18EZ Glazer

    List Price: $5,404.03

    Our Price: $3,197.65

    STANDARD GLAZER WITH A HAND HELD GLAZE APPLICATOR. Compatible with 17 x 25 inch glaze screens, for all 618L, 718L, and all Donut Robots. Belshaw-Adamatic's HG18C Glazer allows fast, uniform glazing of donuts, cinnamon rolls, cakes and other baked goods. It conveniently glazes one full screen at a time with little or no wasted glaze. It is compatible with 17 x 25 inch glaze screens. Glaze is dispensed from the hand held glaze applicator in a curtain about 1/8 inch thick over the whole screen of donuts. A drain tray (HG18EZ-1002) is optional and provides additional flexibility and convenience. All glazer models include movable casters and covers, and require little space. Stainless steel construction and sound design facilitate cleaning and provide a durable product that will stand up to years of everyday use. All Belshaw Adamatic glazers are certified NSF-2. Belshaw Adamatic by Unisource HG18EZ Glazer [HG18EZ] is perfect for your establishment. Learn More
  14. Belshaw Adamatic by Unisource Proofing Frying Screen for 618/718 Fryers 17" x 25" (Pack of 12) [618-0007A]
    Belshaw Adamatic 618-0007A - Proofing Frying Screen for 618/718 Fryers 17" x 25" (12 per Case)

    List Price: $1,132.34

    Our Price: $670.03

    Screens without handles, so they can be easily placed into a baking rack for proofing donuts. After proofing, the screens are placed in the fryer either with detachable handles, or with a Screen Cradle. 10 or more of these screens are normally needed for yeast raised donut production. Comes in packs of 12. Belshaw Adamatic by Unisource Proofing Frying Screen for 618/718 Fryers 17" x 25" (Pack of 12) [618-0007A] is perfect for your establishment. Learn More
  15. Belshaw Adamatic by Unisource Krinkle Plunger for Type N Depositors 1-3/4" [N-1012SSx1-3/4]
    Belshaw Adamatic N-1012SSx1-3/4 - Krinkle Plunger for Type N Depositors 1-3/4"

    List Price: $799.41

    Our Price: $473.03

    Krinkle donuts resemble 8 ball shapes linked together in a ring. This plunger can make Asian 'Pon-de-Ring' donuts. Used with Type N depositors. Belshaw Adamatic by Unisource Krinkle Plunger for Type N Depositors 1-3/4" [N-1012SSx1-3/4] is perfect for your establishment. Learn More
  16. Belshaw Adamatic by Unisource Fill Hose for EZMelt18 [SM100- 0507RH]
    Belshaw Adamatic SM100- 0507RH - Fill Hose for EZMelt18

    List Price: $1,149.27

    Our Price: $680.04

    PROVIDES FIXED CONNECTION TO PUMP SHORTENING FROM EZMELT TO FRYER, OPERATED FROM FRONT. Connects to Mark II, Mark II GP, Mark V or Mark V GP. Used when the operator stands on the opposite side of the fryer's control panel - and the EZMelt slides out the same way. 30 inches long. The Fill Hose provides a fixed connection from EZMelt Melter Filter to a compatible fryer. With the Fill Hose, the operator can top up shortening levels in the fryer at any time by a touch of the foot pedal. Without the refill hose, topping up shortening will probably be done by manually adding shortening cubes directly to the fryer. The refill hose is both safe and convenient by comparison. Belshaw Adamatic by Unisource Fill Hose for EZMelt18 [SM100- 0507RH] is perfect for your establishment. Learn More
  17. Belshaw Adamatic by Unisource Submerger for 734G Fryer [734G-1536]
    Belshaw Adamatic 734G-1536 - Submerger for 734G Fryer

    List Price: $1,128.73

    Our Price: $667.89

    Used when frying ball shaped donuts, such as Loukoumades or Hushpuppies, or any product that can be submerged without affecting quality. Holds fried products below the shortening surface. Belshaw Adamatic by Unisource Submerger for 734G Fryer [734G-1536] is perfect for your establishment. Learn More
  18. Belshaw Adamatic by Unisource Cylinder for Type N Depositors 1-5/8" [N-1035L-Ax1-5/8]
    Belshaw Adamatic N-1035L-Ax1-5/8 - Cylinder for Type N Depositors 1-5/8"

    List Price: $455.19

    Our Price: $269.35

    Plunger size and cylinder size must always match. For example, a 1-1/2 inch plunger must always be used with a 1-1/2 inch cylinder. You can use all types of plunger with a cylinder of the same size. Used with Type N depositors. Belshaw Adamatic by Unisource Cylinder for Type N Depositors 1-5/8" [N-1035L-Ax1-5/8] is perfect for your establishment. Learn More
  19. Belshaw Adamatic by Unisource Fill Hose for EZMelt18 Right Hand [EZ6-0510R]
    Belshaw Adamatic EZ6-0510R - Fill Hose for EZMelt18 Right Hand

    List Price: $850.71

    Our Price: $668.80

    PROVIDES FIXED CONNECTION TO PUMP SHORTENING FROM EZMELT TO MARK VI-DEEP, OPERATED FROM FRONT. The Fill Hose provides a fixed connection from EZMelt Melter Filter to a compatible fryer. With the Fill Hose, the operator can top up shortening levels in the fryer at any time by a touch of the foot pedal. Without the refill hose, topping up shortening will probably be done by manually adding shortening cubes directly to the fryer. The refill hose is both safe and convenient by comparison. Used when the operator stands on the opposite side of the fryer's control panel - and the EZMelt slides out the same way. Belshaw Adamatic by Unisource Fill Hose for EZMelt18 Right Hand [EZ6-0510R] is perfect for your establishment. Learn More
  20. Belshaw Adamatic by Unisource Star Plunger for Type B/F Depositors 1-1/2" [7SC-SSx1-1/2]
    Belshaw Adamatic 7SC-SSx1-1/2 - Plunger for Type B/F Depositors 1-1/2"

    List Price: $331.05

    Our Price: $195.89

    The Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it. Must match a cylinder of the same size. Used with Type B and Type F depositors. Belshaw Adamatic by Unisource Star Plunger for Type B/F Depositors 1-1/2" [7SC-SSx1-1/2] is perfect for your establishment. Learn More
  21. Belshaw Adamatic by Unisource Type K Donut Depositor with 1-9/16" Plain Plunger [8504022]
    Belshaw Adamatic 8504022 - Type K Donut Depositor with 1-9/16" Plain Plunger

    List Price: $637.65

    Our Price: $377.31

    The handheld Belshaw Type K Depositor is ideal for smaller fryers such as Belshaw Adamatic's 616B. This belshaw type k donut depositor hopper holds 5.5 lbs (2.2 kg) and turns out about 5 dozen average size donuts. 6 volume settings can be selected on the handle. Typical weight range is from 1.2 - 1.8 oz (34 - 50g), making a variety of donut sizes possible. Type k donut depositor consistently shaped product is delivered time after time. Belshaw Type K Depositor (Item Nbr 8504022) includes a 1-9/16" plunger for standard size Ring Donuts. In addition the Belshaw Type K Donut Depositor accepts 3 optional attachments to a plain plunger. These attachments divide the donut deposit into 2, 3 or 4 pieces. The Belshaw Type K depositor is corrosion resistant and easy to clean. The belshaw type k depositor is NSF-certified. Belshaw Adamatic by Unisource Type K Donut Depositor with 1-9/16" Plain Plunger [8504022] is perfect for your establishment. Learn More
  22. Belshaw Adamatic by Unisource 0035SSBx1 - Cylinder for Type B/F Depositors 1"
    Belshaw Adamatic 0035SSBx1 - Cylinder for Type B/F Depositors 1"

    List Price: $489.25

    Our Price: $360.40

    Plunger size and cylinder size must always match. For example, a 1-3/4" plunger must always be used with a 1" cylinder. However, you can use any variety of 1-3/4" plunger with a cylinder of the same size. Used with Type B and Type F depositors. Belshaw Adamatic by Unisource Cylinder for Type B/F Depositors 2" [0035SSBx1] is perfect for your establishment. Learn More
  23. Belshaw Adamatic by Unisource Krinkle Plunger for Type B/F Depositors 1-5/8" [7F-1004x1-5/8]
    Belshaw Adamatic 7F-1004x1-5/8 - Krinkle Plunger for Type B/F Depositors 1-5/8"

    List Price: $643.29

    Our Price: $380.65

    Krinkle donuts resemble 8 ball shapes linked together in a ring. This plunger can make Asian 'Pon-de-Ring' donuts. Used with Type B and Type F depositors. Belshaw Adamatic by Unisource Krinkle Plunger for Type B/F Depositors 1-5/8" [7F-1004x1-5/8] is perfect for your establishment. Learn More
  24. Belshaw Adamatic by Unisource Donut Robot Mini-Donut Hopper with 1" Double Plunger [MK-1502-1]
    Belshaw Adamatic MK-1502-1 - Donut Robot Mini-Donut Hopper with 1" Double Plunger

    List Price: $2,964.41

    Our Price: $1,754.09

    The Mini Donut Conversion Kit is made up of exactly the same hopper and plunger combination used by Donut Robot® GP models. You can use the kit with standard Donut Robot® models to change back and forth between standard size donuts and mini donuts. It includes a Mini Donut Hopper and 1-inch Double Plunger. Your machine will use the same conveyor, so it will not make mini donuts quite as fast as a GP machine. The table below gives you an idea of how many mini donuts the Conversion Kit will produce on a standard Donut Robot®. Not quite as many as a GP model, but definitely worth getting if you would like the flexibility to make both full size and mini donuts! Belshaw Adamatic by Unisource Donut Robot Mini-Donut Hopper with 1" Double Plunger [MK-1502-1] is perfect for your establishment. Learn More
per page
Set Ascending Direction

Grid  List