Search results for 'iceu150hw'

per page
Set Ascending Direction

Grid  List 

  1. Belshaw Adamatic by Unisource Drain valve for Mark2 [MK-0557-11.5]

    Belshaw Adamatic by Unisource MK-0557-11.5 - Drain valve for Mark2

    List Price: $412.65

    Our Price: $244.17

    All Donut Robots except gas models have a short drain with a heavy duty metal cap attached to it, to close it off. This Drain and Valve can be attached to the fryer, instead of the threaded cap. To use the drain and valve, you will need: A hole in the table that holds your fryer to allow the drain and valve to extend through it, enough room under the fryer for the Drain and Valve. The Drain and Valve extends 18" (46cm) below the fryer kettle. If you have this room, it will save A LOT of time and trouble emptying shortening. Instead of siphoning, just let the drain do the work. If you use the Drain and Valve when filtering shortening, you will need a filtration system to remove debris from the shortening. You can use a Belshaw EZMelt 18 or any other effective method. If you have room for the Drain and Valve, it will save A LOT of time and trouble emptying shortening. If you do not have this room under the fryer, the drain and valve will probably not help you, and you should consider the Filter Flo siphon (above) instead. The drain cap that comes standard is NOT designed to screw on and off when you empty shortening. Belshaw Adamatic by Unisource Drain valve for Mark2 [MK-0557-11.5] is perfect for your establishment. Learn More
  2. Belshaw Adamatic by Unisource Feed Table Extension for Mark 6 [FT6-0007SH]

    Belshaw Adamatic by Unisource FT6-0007SH - Feed Table Extension for Mark 6

    List Price: $214.43

    Our Price: $126.88

    The Feed Table extension allows more flexibility in loading donuts onto the Feed Table, by making it longer. If you have the space, your employees will have more flexibility when to load the Feed Table. This will make the Mark VI system more efficient, by reducing the chance of gaps where no proofed donuts are ready for transfer to the fryer. Belshaw Adamatic by Unisource Feed Table Extension for Mark 6 [FT6-0007SH] is perfect for your establishment. Learn More
  3. Belshaw Adamatic by Unisource Proofing Cloth Trays for Mark 6 [FT6-0005]

    Belshaw Adamatic by Unisource FT6-0005 - Proofing Cloth Trays for Mark 6

    List Price: $103.38

    Our Price: $61.17

    The Feed Table, Proofing Trays and Proofing Cloths produce high quality yeast-raised donuts on a standard Mark VI donut system. How it works: Mix and roll dough, and cut into yeast-raised donut shapes - rings, bars, berliners (donuts without holes), holes, triangles and all other shapes, even twists and fritters. At this stage, whatever shape you cut should easily fit between the bars of the fryer conveyor, with space left over for expansion. Take one proofing cloth and one proofing tray from your stock. You should have at least 24-48 trays depending on your daily production. Place the proofing cloth on top of the proofing tray. Place 24 rolled and cut donuts on the proofing cloth, between the lines. Repeat the process several times. Allow donuts to rise. Insert tray, cloth and donuts into a proofer to speed up the process. After the donuts have risen, carry each proofing tray, proofing cloth and the donuts (together) to the Feed Table. Place the proofing cloths and donuts on the feed table with the rod in front of one hook on each side of the Feed Table's stainless steel chain. Pull out each Proofing Tray and store it for the next use. The Feed Table advances in time with the fryer and drops the proofed donuts automatically between the bars of the fryer conveyor. The Proofing Cloths are ejected below the Feed Table, ready for re-use. This process produces consistent high quality yeast raised donuts. Belshaw Adamatic by Unisource Proofing Cloth Trays for Mark 6 [FT6-0005] is perfect for your establishment. Learn More
  4. Belshaw Adamatic by Unisource Proofing Cloth Trays for Mark 6 [FT2DW-0510]

    Belshaw Adamatic by Unisource FT2DW-0510 - (Pack of 10)Proofing Cloth Trays for Mark 6

    List Price: $601.91

    Our Price: $356.16

    The Feed Table, Proofing Trays and Proofing Cloths produce high quality yeast-raised donuts on a standard Mark VI donut system. How it works: Mix and roll dough, and cut into yeast-raised donut shapes - rings, bars, berliners (donuts without holes), holes, triangles and all other shapes, even twists and fritters. At this stage, whatever shape you cut should easily fit between the bars of the fryer conveyor, with space left over for expansion. Take one proofing cloth and one proofing tray from your stock. You should have at least 24-48 trays depending on your daily production. Place the proofing cloth on top of the proofing tray. Place 24 rolled and cut donuts on the proofing cloth, between the lines. Repeat the process several times. Allow donuts to rise. Insert tray, cloth and donuts into a proofer to speed up the process.After the donuts have risen, carry each proofing tray, proofing cloth and the donuts (together) to the Feed Table. Place the proofing cloths and donuts on the feed table with the rod in front of one hook on each side of the Feed Table's stainless steel chain. Pull out each Proofing Tray and store it for the next use. The Feed Table advances in time with the fryer and drops the proofed donuts automatically between the bars of the fryer conveyor. The Proofing Cloths are ejected below the Feed Table, ready for re-use. This process produces consistent high quality yeast raised donuts See the Mark VI system video to find out more about the Feed Table, Proofing Trays, and Proofing Cloths. These are sold in packs of 10. Belshaw Adamatic by Unisource Proofing Cloth Trays for Mark 6 [FT2DW-0510] (Pack of 10) is perfect for your establishment. Learn More
  5. Belshaw Adamatic by Unisource Support Table for Mark 6 [MK6-1005]

    Belshaw Adamatic by Unisource MK6-1005 - Support Table for Mark 6

    List Price: $7,044.57

    Our Price: $4,168.39

    The Support Table is designed to safely support all Donut Robot® fryers, Roto-Cooler (or Rack Loader), and EZMelt. It has holes and bolt holes to accept fryers and equipment. Also has shelf storage for screens and other accessories. Belshaw Adamatic by Unisource Support Table for Mark 6 [MK6-1005] is perfect for your establishment. Learn More
  6. Belshaw Adamatic by Unisource Proofing Trays for Mark 6 [FT6-1004]

    Belshaw Adamatic by Unisource FT6-1004 - Proofing Trays for Mark 6

    List Price: $2,646.52

    Our Price: $1,565.99

    The Feed Table, Proofing Trays and Proofing Cloths produce high quality yeast-raised donuts on a standard Mark VI donut system. How it works: Mix and roll dough, and cut into yeast-raised donut shapes - rings, bars, berliners (donuts without holes), holes, triangles and all other shapes, even twists and fritters. At this stage, whatever shape you cut should easily fit between the bars of the fryer conveyor, with space left over for expansion. Take one proofing cloth and one proofing tray from your stock. You should have at least 24-48 trays depending on your daily production. Place the proofing cloth on top of the proofing tray. Place 24 rolled and cut donuts on the proofing cloth, between the lines. Repeat the process several times. Allow donuts to rise. Insert tray, cloth and donuts into a proofer to speed up the process. After the donuts have risen, carry each proofing tray, proofing cloth and the donuts (together) to the Feed Table. Place the proofing cloths and donuts on the feed table with the rod in front of one hook on each side of the Feed Table's stainless steel chain. Pull out each Proofing Tray and store it for the next use. The Feed Table advances in time with the fryer and drops the proofed donuts automatically between the bars of the fryer conveyor. The Proofing Cloths are ejected below the Feed Table, ready for re-use. This process produces consistent high quality yeast raised donuts. Belshaw Adamatic by Unisource Proofing Trays for Mark 6 [FT6-1004] is perfect for your establishment. Learn More
  7. Belshaw Adamatic by Unisource 20 Quart Mixer [BABG-20]

    Belshaw Adamatic by Unisource BABG-20 - 20 Quart Mixer

    List Price: $6,893.68

    Our Price: $4,079.10

    BABG-20 is a solidly built, commercial grade, floor standing mixer ideal for both cake and yeast-raised donut production, as well as general bakery use. The has 3-speeds and comes with Dough Hook, Wire Whip, and Flat Beater. Includes safety features and rubber base for stability. The mixer is ETL and NSF certified. Belshaw Adamatic by Unisource 20 Quart Mixer [BABG-20] is perfect for your establishment. Learn More
  8. Belshaw Adamatic by Unisource Donut Robot Plain Plunger 1-9/16" [U-1001]

    Belshaw Adamatic by Unisource U-1001 - Donut Robot Plain Plunger 1-9/16"

    List Price: $464.49

    Our Price: $274.84

    1-9/16 inch diameter Plain Plunger, for Donut Robot® Mark II, Mark II Gas, and Mark V. Belshaw Adamatic by Unisource Donut Robot Plain Plunger 1-9/16" [U-1001] is perfect for your establishment. Learn More
  9. Belshaw Adamatic by Unisource Donut Robot Star Plunger 1-9/16" [U-1001S]

    Belshaw Adamatic by Unisource U-1001S - Donut Robot Plunger 1-9/16"

    List Price: $464.49

    Our Price: $274.84

    1-9/16 inch diameter Star Plunger, for Donut Robot® Mark II, Mark II Gas, and Mark V. Belshaw Adamatic by Unisource Donut Robot Star Plunger 1-9/16" [U-1001S] is perfect for your establishment. Learn More
  10. Belshaw Adamatic by Unisource Donut Robot Double Plunger for Mini Donuts 1" [MK-1023x1]

    Belshaw Adamatic by Unisource MK-1023x1 - Donut Robot Double Plunger for Mini Donuts 1"

    List Price: $1,707.92

    Our Price: $1,010.60

    1-inch diameter double plunger for Mini Donuts, for Donut Robot® Mark II GP, Mark II GP Gas, and Mark V GP. Belshaw Adamatic by Unisource Donut Robot Double Plunger for Mini Donuts 1" [MK-1023x1] is perfect for your establishment. Learn More
  11. Belshaw Adamatic by Unisource Donut Robot Mini-Donut Hopper with 1" Double Plunger [MK-1502-1]

    Belshaw Adamatic by Unisource MK-1502-1 - Donut Robot Mini-Donut Hopper with 1" Double Plunger

    List Price: $2,964.41

    Our Price: $1,754.09

    The Mini Donut Conversion Kit is made up of exactly the same hopper and plunger combination used by Donut Robot® GP models. You can use the kit with standard Donut Robot® models to change back and forth between standard size donuts and mini donuts. It includes a Mini Donut Hopper and 1-inch Double Plunger. Your machine will use the same conveyor, so it will not make mini donuts quite as fast as a GP machine. The table below gives you an idea of how many mini donuts the Conversion Kit will produce on a standard Donut Robot®. Not quite as many as a GP model, but definitely worth getting if you would like the flexibility to make both full size and mini donuts! Belshaw Adamatic by Unisource Donut Robot Mini-Donut Hopper with 1" Double Plunger [MK-1502-1] is perfect for your establishment. Learn More
  12. Belshaw Adamatic by Unisource Dunkerette Attachment for Type K or Donut Robot [DR42-1018X1.563]

    Belshaw Adamatic by Unisource DR42-1018X1.563 - Dunkerette Attachment for Type K or Donut Robot

    List Price: $124.14

    Our Price: $73.46

    Dunkerette attachment for Donut Depositor, attaches to K-1011A or K-1011S, deposits two half-donut shapes. For 1-9/16 inch plunger only. Attachments are small devices that insert easily onto 1-9/16" Plain or Star plungers only. Belshaw Adamatic by Unisource Dunkerette Attachment for Type K or Donut Robot [DR42-1018X1.563] is perfect for your establishment. Learn More
  13. Belshaw Adamatic by Unisource Nugget Attachment for Type K or Donut Robot [DR42-1016X1.563]

    Belshaw Adamatic by Unisource DR42-1016X1.563 - Nugget Attachment for Type K or Donut Robot

    List Price: $233.75

    Our Price: $138.31

    Nugget attachment for Donut Depositor, attaches to K-1011A or K-1011S, deposits three ball shapes. For 1-9/16 inch plunger only. Attachments are small devices that insert easily onto 1-9/16" Plain or Star plungers only. Donuts produced by the Nugget attachment can either stick together or remain apart, depending on the height of the hopper above the shortening. Belshaw Adamatic by Unisource Nugget Attachment for Type K or Donut Robot [DR42-1016X1.563] is perfect for your establishment. Learn More
  14. Belshaw Adamatic by Unisource Ball Attachment for Type K or Donut Robot [DR42-1017X1.563]

    Belshaw Adamatic by Unisource DR42-1017X1.563 - Ball Attachment for Type K or Donut Robot

    List Price: $261.87

    Our Price: $154.95

    Ball attachment for Donut Depositor, attaches to K-1011A or K-1011S, deposits four ball shapes. For 1-9/16 inch plunger only. Attachments are small devices that insert easily onto 1-9/16" Plain or Star plungers only. Donuts produced by the Ball attachments can either stick together or remain apart, depending on the height of the hopper above the shortening. Belshaw Adamatic by Unisource Ball Attachment for Type K or Donut Robot [DR42-1017X1.563] is perfect for your establishment. Learn More
  15. Belshaw Adamatic by Unisource Holder for Type K Pancake Dispenser [K-1016WSS]

    Belshaw Adamatic by Unisource K-1016WSS - Holder for Type K Pancake Dispenser

    List Price: $83.89

    Our Price: $49.64

    This is the holder for Belshaw's Type K Pancake Dispenser is the professional's choice for accurately depositing pancake batter. It is also suitable for Waffle and Waffle Cones. The Type K is quick and easy to use and provides accurate portion control at a variety of sizes, from mini to extra large. Belshaw's Type K depositors are designed to be mastered by the novice in minutes. Operation is easily accomplished with minimal waste, and consistent deposits are easily delivered time after time. Each pancake dispenser offers 8 calibrated volume settings located on the handle. Hopper size is generous and holds about 5.5 pounds (2.5 kg). Each hopper is constructed of aluminum; each plunger and cylinder is constructed of stainless steel. The entire unit is corrosion resistant and easy to clean. The Type K Pancake Dispenser is NSF-C2 certified. Belshaw Adamatic by Unisource Holder for Type K Pancake Dispenser [K-1016WSS] is perfect for your establishment. Learn More
  16. Belshaw Adamatic by Unisource Star Plunger for Type N Depositors 1-5/8" [N-1007SSSx1-5/8]

    Belshaw Adamatic by Unisource N-1007SSSx1-5/8 - Plunger for Type N Depositors 1-5/8"

    List Price: $479.65

    Our Price: $283.82

    The Star plunger typically makes a ring donut with a more consistent, rounder hole than the plain plunger, with a star pattern around it. Must match a cylinder of the same size. Used with Type N depositors. Belshaw Adamatic by Unisource Star Plunger for Type N Depositors 1-5/8" [N-1007SSSx1-5/8] is perfect for your establishment. Learn More
  17. Belshaw Adamatic by Unisource Shortening Filter [SF18]

    Belshaw Adamatic by Unisource SF18 - Shortening Filter

    List Price: $5,129.18

    Our Price: $3,035.02

    Compatible with 618L, 718LCG and 718LFG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy duty pump and motor for pumping back shortening to the fryer after filtering. Foot pedal switch for activating pump. Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer. Slides under compatible floor and tabletop fryers. Heavy duty stainless steel frame, tank and casters. Shortening reservoir is removable for periodic cleaning. SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt18 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-PhaseCertified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource Shortening Filter [SF18] is perfect for your establishment. Learn More
  18. Belshaw Adamatic by Unisource Shortening Filter [SF34]

    Belshaw Adamatic by Unisource SF24 - Shortening Filter

    List Price: $5,256.33

    Our Price: $3,110.26

    Compatible with 624, 724CG and 724FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy duty pump and motor for pumping back shortening to the fryer after filtering. Foot pedal switch for activating pump. Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer. Slides under compatible floor and tabletop fryers. Heavy duty stainless steel frame, tank and casters. Shortening reservoir is removable for periodic cleaning. SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt24 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-PhaseCertified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource Shortening Filter [SF24] is perfect for your establishment. Learn More
  19. Belshaw Adamatic by Unisource Shortening Filter [SF34]

    Belshaw Adamatic by Unisource SF34 - Shortening Filter

    List Price: $5,786.47

    Our Price: $3,423.94

    Compatible with 734CG and 734FG fryers. Not recommended for trans-fat free shortening - this type of shortening becomes solid very quickly and can cause pump blockages. Uses a long-life synthetic filter screen that needs only annual replacement under normal operating conditions. Heavy duty pump and motor for pumping back shortening to the fryer after filtering. Foot pedal switch for activating pump. Includes hand held rinse hose for rinsing debris from bottom of fryer and for refilling fryer. Slides under compatible floor and tabletop fryers. Heavy duty stainless steel frame, tank and casters. Shortening reservoir is removable for periodic cleaning. SF Shortening Filters are not designed for Zero Trans Fat shortenings. These shortenings solidify as they cool down, sometimes causing blockages in the filter pump. Belshaw recommends the EZMelt34 Melter-Filter for Zero Trans Fat shortenings. The EZMelt contains a heating element to liquefy any shortening. 120V or 240V, 50 or 60 Hz, 1-PhaseCertified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource Shortening Filter [SF34] is perfect for your establishment. Learn More
  20. Belshaw Adamatic by Unisource EZMelt Shortening Filters [EZMelt24]

    Belshaw Adamatic by Unisource EZMelt24 - EZMelt Shortening Filters

    List Price: $5,923.17

    Our Price: $3,504.84

    THE BEST FILTRATION SYSTEM FOR 624 AND 724CG/FG FRYERS. MELTS, FILTERS AND PUMPS BACK ON DEMAND. Compatible with 624, 724CG and 724FG fryers. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt24 is a recycling filter that heats shortening in the tank, with the following benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity up to 22.5 gallons (85 Liters) - approximately equivalent to 163 lbs (73 kg) of shortening. Compatible with Belshaw's floor model 624, 724CG and 724FG fryers. For other brand fryers, check capacity and dimensions to determine compatibility.Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. Tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy duty pump & motor for pumping shortening to the fryer on demand. Heavy duty, moisture repellent foot switch for activating pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Hand held rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. Stainless steel frame, tank and casters. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource EZMelt Shortening Filters [EZMelt24] is perfect for your establishment. Learn More
  21. Belshaw Adamatic by Unisource EZMelt Shortening Filters [EZMelt34]

    Belshaw Adamatic by Unisource EZMelt34 - EZMelt Shortening Filters

    List Price: $6,461.13

    Our Price: $3,823.16

    THE BEST FILTRATION SYSTEM FOR 734CG, 734FG, AND DONUT ROBOT MARK VI. MELTS, FILTERS AND PUMPS BACK ON DEMAND.Compatible with 734CG and 734FG fryers, and Donut Robot® Mark VI. The EZMelt filtration system is the only filtration system recommended if you use Trans Fat-free shortening. The EZMelt34 is a recycling filter that heats shortening in the tank, with these benefits: If Zero Trans Fat shortenings are used, they gradually become thicker at normal bakery temperatures. This can lead to pump blockages and failures with standard filters. Using the heated EZ Melt overcomes this problem.Pumping reheated shortening through a fixed connection to the fryer is faster and safer than any other method, such as dropping in shortening blocks. The EZMelt does this using a refill hose (optional) which attaches directly to a Belshaw fryer. Standard features: Capacity 31.25 gallons (118 Liters), approximately equivalent to 225 lbs (102 kg) shortening. Compatible with Belshaw's floor model 734LFG and 734LCG fryers, and with Donut Robot® Mark VI. For other brand fryers, check capacity and dimensions to determine compatibility.Can be used with any standard donut shortening including Zero Trans Fat shortening. Heating element with factory set thermostat to 225°F/107°C. Element tilts up for easy tank cleaning. Tank itself is readily removable. Long-life synthetic filter screen that needs only annual replacement under normal operating conditions.Heavy duty pump & motor for pumping shortening to the fryer on demand. Heavy duty, moisture repellent foot switch for activating pump. Cube cutter for fast melting of solid shortening blocks up to 50lbs (22.7kg)Hand held rinse hose with heat resistant handle. Optional Refill Hose - allows regular topping up of fryer through a fixed connection to the fryer. The refill hose can be left in place on a Belshaw fryer at all times allowing frequent topping up of shortening level. High-temperature limit switch. 120V or 240V, 50 or 60 Hz, 1-Phase. Certified by ETL to NSF Std 4, CSA C22.2, and UL 1889. Belshaw Adamatic by Unisource EZMelt Shortening Filters [EZMelt34] is perfect for your establishment. Learn More
  22. Belshaw Adamatic by Unisource EP18-24 Proofer [EP18-24]

    Belshaw Adamatic by Unisource EP18-24 - EP18-24 Proofer

    List Price: $10,825.66

    Our Price: $6,405.72

    17-SHELF PROOFING CABINET FOR DONUT PRODUCTION AND GENERAL BAKERY USE.With 6 doors and 17 shelves, this proofer is made for donut production! You can take out one proofing tray at a time if you want to, instead of an entire rack if you use a standard proof box. The EP18/24 is designed for donut production as well as general bakery use. It accepts Proofing and Frying screens from floor model fryers up to 24"x 24". It also accepts proofing trays for Donut Robot systems. EP18/24 has 6 doors and 17 shelves for convenient use. Screens or trays can be inserted or removed at any time. Plexiglass doors allow the operator to check how the contents are rising. The proofer is also suitable for baking pans and general bakery usage. EP18/24 is not readily compatible with screens from 616B fryers and Cut-N-Fry (too small), or 734 (too large). EP18/24 does not accept baking racks. ETL listed. Belshaw Adamatic by Unisource EP18-24 Proofer [EP18-24] is perfect for your establishment. Learn More
  23. Belshaw Adamatic by Unisource HG18C Glazer [HG18C]

    Belshaw Adamatic by Unisource HG18C - HG18C Glazer

    List Price: $2,867.80

    Our Price: $1,696.92

    STANDARD GLAZER WITH A HAND HELD GLAZE APPLICATOR. Compatible with 17 x 25 inch glaze screens, for all 618L, 718L, and all Donut Robots. Belshaw-Adamatic's HG18C Glazer allows fast, uniform glazing of donuts, cinnamon rolls, cakes and other baked goods. It conveniently glazes one full screen at a time with little or no wasted glaze. It is compatible with 17 x 25 inch glaze screens. Glaze is dispensed from the hand held glaze applicator in a curtain about 1/8 inch thick over the whole screen of donuts. A drain tray (HG18EZ-1002) is optional and provides additional flexibility and convenience. All glazer models include movable casters and covers, and require little space. Stainless steel construction and sound design facilitate cleaning and provide a durable product that will stand up to years of everyday use. All Belshaw Adamatic glazers are certified NSF-2. Belshaw Adamatic by Unisource HG18C Glazer [HG18C] is perfect for your establishment. Learn More
  24. Belshaw Adamatic by Unisource HG18EZ Glazer [HG18EZ]

    Belshaw Adamatic by Unisource HG18EZ - HG18EZ Glazer

    List Price: $5,404.03

    Our Price: $3,197.65

    STANDARD GLAZER WITH A HAND HELD GLAZE APPLICATOR. Compatible with 17 x 25 inch glaze screens, for all 618L, 718L, and all Donut Robots. Belshaw-Adamatic's HG18C Glazer allows fast, uniform glazing of donuts, cinnamon rolls, cakes and other baked goods. It conveniently glazes one full screen at a time with little or no wasted glaze. It is compatible with 17 x 25 inch glaze screens. Glaze is dispensed from the hand held glaze applicator in a curtain about 1/8 inch thick over the whole screen of donuts. A drain tray (HG18EZ-1002) is optional and provides additional flexibility and convenience. All glazer models include movable casters and covers, and require little space. Stainless steel construction and sound design facilitate cleaning and provide a durable product that will stand up to years of everyday use. All Belshaw Adamatic glazers are certified NSF-2. Belshaw Adamatic by Unisource HG18EZ Glazer [HG18EZ] is perfect for your establishment. Learn More
per page
Set Ascending Direction

Grid  List